PIPE CLEANING & COATING EQUIPMENT

 

The Circleblast Internal Pipe Blasters are designed to blast clean pipe ranging in size from 1¼” to 12” (13 to 305 mm) I.D. The tool connects to an abrasive blast machine in place of a standard nozzle. In operation, the Circleblast nozzle directs the air/abrasive mixture at a deflection tip. This tip causes the blast pattern to fan out into a wide, circular pattern, which cleans the inside of the pipe as the tool is passed through. Two centering devices are available to hold the tool in position during passes. The Circleblast tool is made from the finest materials available. However, some of its internal wear parts are of necessity rather brittle, due to their extreme hardness. The tool should therefore be handled carefully to avoid dropping it or giving it a sharp blow.

 

  

The Spinnerblast tool cleans the interior of pipes up to 40’ long and ranging in size from 8” (203 mm) to 36” (915 mm) I.D. The tool connects to most abrasive blasting machines in place of a standard nozzle. As the tool passes through the length of the pipe being cleaned, abrasive is ejected by two special nozzles mounted on a rotating head. Optimal rotating speed is controlled by the braking system. An adjustable centering carriage supports the tool through the pipe internal. The chart below shows the recommended centering legs, nozzle sizes and compressor capacities for different pipe diameters.

 

PIPECOATER-III/125 tool is designed to coat the inside of pipe or tubing ranging from 76 to 125 mm (3” - 5”) ID without the need to rotate pipe or tubing and to apply an even paint film thickness throughout. Generally, any type of coating may be used in this tool that can be airless sprayed. 

 

 

PIPECOATER-III/300 tool is designed to coat the inside of pipe or tubing ranging from 125 to 300 mm (5” - 12”) ID without the need to rotate pipe or tubing and to apply an even paint film thickness throughout. Generally, any type of coating may be used in this tool that can be airless sprayed.

 

 

 

PIPECOATER-III/900 tool is designed to coat the inside of pipe or tubing ranging from 300 to 900 mm (12” - 36”) ID without the need to rotate pipe or tubing and to apply an even paint film thickness throughout. Generally, any type of coating may be used in this tool that can be airless sprayed.

 


Visitors: 131,784